mapstackLearn
Get started

Start here

How Mapstack works with you

When Mapstack goes ahead and when it asks first, how it tells you what it did, what it will not state about your data, and what to do when it cannot help.

Video: How Mapstack works with you · 1 min 14 s

Mapstack works like a capable colleague who keeps you in charge. It looks at whatever helps without asking. It asks before it makes or changes anything, unless your words already say exactly what to do. And it tells you what it did, so you can check it.

When it goes ahead, and when it asks first

Looking needs no permission. Mapstack searches, reads and inspects whatever helps answer you. Looking is still work, so it uses part of your allowance.

Making or changing needs your go-ahead. Making or editing a dataset, a map, an app, a report or a print waits for your yes. Two things already count as a yes:

  • Exact words. "Make the icons blue" says what to do, so Mapstack does it, and everything it needs for it, without asking again.
  • An attached file. Getting a file you attached ready to use is part of your request.

While it works

You can see that it is working. While Mapstack works, a line in the conversation says what it is doing, and the send button becomes Stop. As long as they show, the work is going on. Select Stop to end it; send a message to carry on.

One turn runs for up to about 14 minutes. A turn is everything Mapstack does between your message and its reply. If one runs out of time, the conversation says "This turn ran out of time before it finished. Send a message to pick up where it left off." Send one, and it carries on from there.

It keeps working when you leave. The work runs on Mapstack's side, not in your browser. While a turn is going, your browser asks before you leave the page. Leave or close the tab anyway, and the turn carries on until it finishes, you stop it, or its time runs out. Reopen the session to pick it up. The same session open in another tab or on another device shows the same work.

Proposals: when your request leaves things open

When Mapstack would have to work out what you want ("map my customer data"), or when the next step is its own idea, it proposes first and waits. A proposal is a short message in the conversation. It says:

  • what Mapstack understands you want, and who it is for;
  • what it will help you see or decide;
  • the data it would use;
  • anything you asked for specifically, as you asked for it.

Reply yes, or correct it. Your yes covers what was proposed and nothing more. If Mapstack only offers ("want me to map them?") and you say yes, you still get a proposal, because the offer did not say what the map should be.

A proposal does not list what a map, report or print will contain. Mapstack designs those from your request. If a detail matters, say it. See How to ask for things.

When it stops to ask you something

Sometimes a job reaches a choice that changes the result, and nothing you have said settles it: which of two columns holds the figure you meant, for example. The job pauses and the question appears as a card in the conversation, with options to pick from and room to type your own answer. One option may be marked as the one Mapstack recommends. When you answer, the job carries on from where it paused.

If the conversation already settles the choice, Mapstack makes it and tells you in one line what it settled, so you can correct it. If your typed answer does not settle the choice, it asks again.

Before a large job, it tells you the cost

Before a job that will use a large share of your allowance, Mapstack pauses and says how much, with Go ahead and Don't run it. Before drawing 400 m walking areas around 1,624 places, for example, it said: "This will use about 5% of your allowance."

  • Nothing runs until you select Go ahead. Typing yes in the conversation does not approve it.
  • Your approval covers the amount shown. If the job grows past it, Mapstack asks again.
  • Don't run it means the job is not run and nothing more is used.

If there is not enough of your allowance left for a job, it does not start: a card says "This needs about N% of your allowance" and offers the next step for your seat, with Not now. A job that has started is never stopped part-way for this reason. See Your allowance.

On Free, some things need a Creator seat

On Free, asking for a report, a print or an app, or adding imagery or a 3D scene, brings up a card such as "A report needs a Creator seat", with Upgrade and Not now. Where Free has a way to carry on, the card offers it: Make it a dataset in place of a report, Make it a map in place of a print, Make it a map now in place of an app. See What's on Free.

It tells you what it did

With a result, Mapstack says how it got there. Expect:

  • The method, step by step, in your terms. Asked in GIS terms, it answers with the filter, the join, the routing, the coordinate system at each step and the date of every input.
  • The calls it made for you. Working out walking access for Liverpool's wards, it kept bus stops just outside the city so that people near the boundary were counted, and said so.
  • What it did and did not check. A report on that work said its ward figures were checked arithmetically, and that the routing and the source dates were not.
  • What it could not do, with what is missing and what would let it be done.
  • Caveats and suggestions: limits you should know before you rely on the result, and what else the data could show.

Read it as you would a colleague's notes. If a call is not the one you would make, say what you want instead.

What it will and won't state about your data

People make decisions on what Mapstack tells them, so it keeps what your data shows apart from what it knows in general.

Mapstack willMapstack won't
State a figure about your data when an analysis in this conversation returned itInvent a total, a count, a date, a name or a rank
Do plain arithmetic and rounding on figures that were returnedWork out a value from a returned figure and an assumed one
Mark general knowledge as such, before the claim: "from what I know", "generally"Present general knowledge as something your data, map or analysis shows
Say it does not have a figure when no analysis returned itSay which of your places are in, near or served by others unless an analysis checked it

Mapstack does not read your rows the way a person scans a sheet: figures come from analysis run on the data. So it will sometimes say it does not have a number, or point you to where it is shown. Asked for the lowest and highest point in an elevation file, it pointed to the imagery's Details, where they are listed. Asked for the file's vertical units, it said the file did not state them and gave the data publisher's specification as its source.

When it can't do something

It says so plainly, and offers a way forward. Asked for zonal statistics on an elevation image, it said that analysis works on datasets, not imagery, and offered what it could do: read heights on the map, show the land in 3D, or map figures worked out elsewhere and brought in as a table.

When a job stops because something is missing that Mapstack can supply itself, such as a column in the form the work needs or data it can fetch, it supplies it and tries again. It does not offer you only a way to drop what you asked for.

Some things are done on screen, not by asking: projects, routines, settings, sharing, publishing and downloads. Ask for one of them and Mapstack tells you so and gives you the steps.

Messages you may see

What you seeWhat it means, and what to do
"You stopped this turn."You selected Stop. Items already created stay in your Library; the message says so when the turn has a finished item. Send a message to carry on.
"This turn ran out of time before it finished. Send a message to pick up where it left off."The work ran too long. Send a message to continue.
"Trying again automatically…" with Refresh pageThe connection dropped. Wait, or refresh the page.
"We can't load your workspace" with Try againThe workspace did not load. Select Try again.

With a Viewer seat

A Viewer seat gets a version of Mapstack that answers questions and changes nothing. It answers questions about the maps, datasets, reports, prints, imagery and scenes in the workspace: a figure, a list, or where to look. It can highlight the rows behind an answer on an open dataset, bring another item from the workspace into the conversation, and say where a figure in a report comes from. It follows the same rules about figures as above.

Asked to make or change something, it says it cannot, and tells you to ask the workspace owner for a Creator seat. A session keeps the version it started with: if your seat changes from Viewer to Creator, start a new session. See Seats and what each can do.

On a routine, there is nobody to ask

A routine runs without you in the conversation, so no card or proposal can be shown. Mapstack decides for itself where it can, and otherwise the run stops and says why. A routine cannot change an app: apps are changed only in a session with someone there. See What a routine can and can't do.

Search the docs

Type to search every docs page.