# Work out where to open the next site

Compare candidate locations by their travel-time catchments, the people living inside them and the competitors nearby.

Video: Where to open the next site (1 min 9 s): /images/docs/videos/where-to-open-the-next-site.mp4

## Best for

People who run shops, kiosks, clinics, gyms, depots or branches and have a shortlist of places where the next one could go. You do not need any mapping (GIS) experience.

You end up with a catchment for each candidate (the area within a set travel time of it), the number of people living in each catchment, the number of competitors inside it, and the candidates set side by side in a table or on a map. Mapstack gives you measured figures. The decision stays yours.

**The example in this guide** is Pretzel Hatch, the kiosk chain these docs return to: its 149 existing sites at London stations, and five candidate stations in east London where the next one could go (Ilford, Lewisham, Wood Street, Custom House and Canary Wharf). The stations are real; the company is made up for the example. Its customers arrive on foot, so the catchment is a 10-minute walk, and its competitors are bakeries.

## What you need

- **Your existing sites and your candidate sites**, as spreadsheets (.csv, .xlsx or .xls) with one row per site. Each row needs an address, or latitude and longitude columns. Two files are fine: attach both with the same message.
- **The name of the town, city or region** you are looking in. Mapstack searches for competitors inside a named area.
- **A seat that can make things**: Free, Creator or Creator Max. A Viewer seat cannot attach files, and its questions cannot use travel times or census figures.
- **Optional: a spreadsheet of customer addresses**, if you want sites chosen by how many customers they reach.

## Before you start

- **Travel-time limits.** A catchment can be at most 120 minutes or 200 km. You can ask for driving, truck, cycling or walking. There is no live traffic and no public transport.
- **Your allowance.** Travel times and address lookups use part of your allowance. Before a large job, Mapstack shows a card saying roughly what share it will use, and waits for your click.
- **Census coverage depends on the country.** Ask Mapstack which countries and which area levels it holds before you rely on it.
- **Competitors come from open data.** Places are taken from Overture Maps. The list can miss places, or still show ones that have closed.
- **Very large data.** See [Sizes and limits](/docs/workspace/sizes-and-limits).
- **What Mapstack will state.** It reports figures that an analysis returned. If an answer needs a value that nothing returned (rent or footfall, say), it tells you it does not have it.

## The prompt

> These are our 149 existing sites and 5 candidate stations in east London. For each candidate, draw the area within a 10-minute walk, count the people living in it, and count the bakeries inside it.

## What to expect

1. **Attach both lists and send your prompt**

   Click **Attach file** (the paperclip in the message box) and pick both spreadsheets, or drag them onto the message box. Mapstack places the rows of each file as points, so you get two datasets: your existing sites and your candidates.

   Addresses are looked up. Rows with latitude and longitude are placed as they are. Mapstack may show a card asking which country or area the places are in. Rows it cannot place are left out and reported.

2. **Mapstack proposes the work**

   Mapstack can look at your data without asking. Before it makes anything from an open request, it sends a short proposal: what it understands you want, the benefit, and the data it would use. Reply yes, or correct it.

   While it works, each piece of work shows as a line in the chat that opens to list its steps.

3. **It draws a catchment around each candidate**

   A catchment here is the area within your travel time of a site, measured along streets and paths. GIS users know these as isochrones. Driving is used unless you ask for walking, cycling or truck, so say "walk" when your customers arrive on foot. A walk follows the paths people can use: in the example the Thames and the docks give Canary Wharf's catchment a very different shape from Lewisham's.

   Travel times use part of your allowance. If the job is large, a card shows roughly what share it will use. Only your click approves it. If you say no, the analysis ends there and nothing more is run.

4. **It counts the people in each catchment**

   Mapstack adds published census figures to each catchment. People are counted by the share of each census area that falls inside the catchment. In England and Wales those areas are output areas of a few hundred people, so the counts are close; where census areas are large or unevenly settled, treat the figures as estimates. In the example, Census 2021 usual residents: from 5,829 within a 10-minute walk of Canary Wharf to 14,319 around Ilford.

   If the measure you asked for is not available for your place, Mapstack stops and asks you. It does not swap in a different measure without telling you.

5. **It finds the competitors and counts them**

   Mapstack searches for places of the kind you named inside the area you named, and saves them as a dataset. Each place carries a confidence (high, medium or low), and listings that may be the same place are flagged as possible duplicates.

   It then counts the competitors that fall inside each catchment. In the example, 24 bakeries across the five walks.

6. **You get the candidates side by side**

   The answer arrives in the chat as a table, with buttons to copy or download it. Each figure is taken from a step the analysis ran. Mapstack also tells you the choices it made and any caveats. In the example:

   | Candidate | People within a 10-minute walk | Bakeries inside |
   | --- | --- | --- |
   | Ilford | 14,319 | 6 |
   | Lewisham | 13,408 | 2 |
   | Wood Street | 12,412 | 7 |
   | Custom House | 10,557 | 1 |
   | Canary Wharf | 5,829 | 8 |

   Custom House stands out: over 10,000 people within a short walk and one bakery. Canary Wharf has the most bakeries and the fewest residents, because the people there in the day work there, and a count of residents does not see them.

   Where catchments overlap, the same people and competitors are counted for each site. That is right for what each site can reach, and misleading if you add the sites together.

   Ask for a map and Mapstack proposes one built from these results.

   ![Example: two of the five candidates up close, Canary Wharf and Custom House, each sized by the people within a 10-minute walk, with the bakeries inside each walk: 5,829 people and 8 bakeries at Canary Wharf, 10,557 people and 1 bakery at Custom House.](/images/docs/where-to-open-the-next-site/walk-catchments.jpeg)

   Mapstack states a figure only when an analysis returned it. Anything from its own general knowledge is labelled as such, for example "from what I know". Which site to open is your call.

## Make it your own

> Count the people within a 5-minute walk of each candidate as well, as a separate band

> Do the same for our existing sites so I can compare the candidates with them

> Which candidates are most like our three sites with the highest covers? Compare on people and bakeries within a 10-minute walk

> Make a map of the candidates and their 10-minute walk areas, with each candidate sized by the people in its area

## Common questions

**What travel times can I ask for?**

Driving, truck, cycling or walking, up to 120 minutes or 200 km. Times are along roads and paths with no live traffic, and there is no public transport mode.

**What if there are no census figures for my country?**

Mapstack says so, and asks before it uses a stand-in such as a related measure or another year. You can also attach your own population by area and ask for it to be counted inside each catchment.

**Can I use my own list of competitors?**

Yes. Competitors found by Mapstack come from Overture Maps, which can miss places or still list closed ones. Attach your own list and ask Mapstack to count those instead.

**Can it tell me rent or footfall?**

Only from data. Mapstack states a figure only when an analysis returned it, and does not work one out from an assumption. Attach the data, or ask it to find a dataset, and ask again.

**What happens to sites it can't place?**

Addresses that could not be found are left out and reported. Correct them in the spreadsheet and attach it again.

## Related

- [Find who and what is within reach](https://mapstack.io/docs/answers/whos-within-reach.md)
- [Count and summarise by area](https://mapstack.io/docs/answers/count-and-summarise-by-area.md)
- [Data Mapstack can find for you](https://mapstack.io/docs/find-data/data-mapstack-finds.md)
- [Choose where to go next](https://mapstack.io/docs/answers/where-to-go-next.md)
