# Make a black-and-white figure-ground drawing of the buildings around a site

Turn a file of building footprints into a figure-ground plan: buildings solid black, no labels, at a stated scale with a scale bar and north arrow.

Video: Make a black-and-white figure-ground drawing of the buildings around a site (1 min 13 s): /images/docs/videos/figure-ground-base-map.mp4

## Best for

Architects, urban designers, landscape architects and students who need a context drawing of a site: a figure-ground plan (also called a Nolli map or an urban fabric plan) for a design statement, a competition board or an early study. You end up with a print-ready sheet at a stated scale, the buildings in solid black, no labels, with a scale bar and a north arrow, to download as a PDF or PNG. The buildings stay a dataset you can download for CAD or GIS.

**The example in this guide** uses a real file: 552 building footprints within 500 metres of Plaça de les Glòries Catalanes in Barcelona, exported from OpenStreetMap through the Overpass API on 11 November 2026 (© OpenStreetMap contributors). Each building is a polygon, some with a name, a building type, a number of storeys or a height. Every ask below was sent with that file, and results vary in the detail from one run to the next.

## What you need

- **The building footprints, as a file.** GeoJSON, shapefile, GeoPackage or KML. Mapstack does not fetch building footprints for an area: asked to, it searches open data and the Community Library, says when it finds nothing it can load, and asks you for a file. Two ways to get one:
  - **From OpenStreetMap,** with Overpass Turbo (overpass-turbo.eu): run a query for buildings within a distance of your site, then select **Export** and download the result as GeoJSON. Asked, Mapstack writes the query for you.
  - **From your national or city mapping agency,** where it publishes building outlines as a download (for Barcelona, the city's CartoBCN). Download the area as a shapefile, GeoPackage or GeoJSON.
- **The site boundary, as a file,** if the drawing must show it. Mapstack can look a place up by name, but what comes back may not be the outline you mean (see below).
- **The paper size and orientation,** and what the sheet must carry.
- **A Creator or Creator Max seat.** Prints are made on paid seats.

## Before you start

- **A sheet with a north arrow sits on a base map.** A plain white ground comes only on a data visualisation, which carries a scale bar but no north arrow and no stated scale. Mapstack asks which you want. With the north arrow, it uses its palest base map with every label and icon turned off, so the streets and open space read as a light grey ground rather than pure white.
- **The drawing downloads as a PDF or a PNG.** There is no DXF or DWG. For CAD, use the buildings dataset itself (see "You ask for a CAD file").
- **Paper sizes are A4, A3, Letter and Tabloid,** portrait or landscape. Mapstack picks the scale that fits your file on the sheet and states it.

## The prompt

> Attached: building footprints within 500 m of Plaça de les Glòries, Barcelona (OpenStreetMap). I need a figure-ground plan for a design statement: every building filled solid black, streets and open space left white, no labels, on an A3 landscape sheet with a scale bar and north arrow.

## What to expect

1. **Your buildings become a dataset**

   The file is kept as a dataset you can open and check, with every building and its columns (in the example, 552 records). The print is drawn from it, so what is in the file is what is on the drawing: a building missing from the export is missing from the plan.

2. **Mapstack asks about the ground**

   A pure white ground and a north arrow do not come together, so Mapstack stopped and asked. Its recommendation was **Use white-ground layout (scale bar, omit north arrow)**. The example chose **Other** and answered: "The drawing needs a north arrow. Keep the plain white ground and add a north arrow; if that cannot be done, use the GIS sheet on the plainest, lightest base map you have."

   If the north arrow can go on later in your drawing software, take the white ground.

3. **You get the figure-ground sheet**

   An A3 landscape GIS sheet: every building solid black with no outline, courtyards and light wells left open, no labels, over a pale grey base map with its labels and icons turned off. Around the map: a scale bar in metres, a north arrow, a one-line key, the scale ("1:4,000 at A3. Print at 100%."), the date and the credits for the base map and your file. Mapstack titled it "Building morphology: Plaça de les Glòries, Barcelona"; say the title you want if you have one.

   ![Example: the A3 figure-ground plan of the 552 buildings around Plaça de les Glòries, at 1:4,000.](/images/docs/figure-ground-base-map/glories-figure-ground-a3.jpeg)

   The image is 4,961 × 3,508 pixels, 300 dpi, the true A3 size.

4. **You mark the site**

   To show the site, attach its boundary as a file with the buildings and ask for it in red, with any ring you need around it, such as 500 m. Mapstack draws the ring as a buffer around the boundary and widens the frame to fit.

   Your own boundary is the reliable route. Without one, Mapstack looks the place up by name in OpenStreetMap's gazetteer and draws what comes back; a park looked up by name may come back as a line, not its outline, and a ring is measured from whatever came back.

5. **You ask for a CAD file**

   > Can I get it as DXF for the architects to draw over?

   There is no DXF download. Mapstack suggested two routes: import the print's PDF into CAD (for example AutoCAD's PDFIMPORT), or download the datasets as GeoJSON or GeoPackage and convert them to DXF in a GIS-aware CAD package or QGIS.

   Take the second route for linework. In the PDF the map, buildings included, is a single image; only the frame and the words around it are text and lines. Imported into CAD, the buildings arrive as a picture to trace, not as outlines. The buildings dataset holds the real outlines: open it, select **Download**, then **GeoJSON** or **GeoPackage**. The coordinates are longitude and latitude (WGS 84), so set the projection when you convert.

## Common questions

**Can Mapstack find the building footprints for me?**

No. It does not fetch building footprints for an area. Export them from OpenStreetMap with Overpass Turbo (Mapstack writes the query if you ask), or download them from your national or city mapping agency, and attach the file.

**Can it mark my site boundary?**

Yes, best from a file attached with the buildings. A place looked up by name can come back as a point, a line or another area than the one you mean, and any ring is measured from it, so open the boundary dataset and look before the sheet goes out.

**Can the ground be pure white with a north arrow?**

No. A sheet with a north arrow sits on the palest base map with its labels turned off, which reads as light grey. For pure white, take the layout without a north arrow and add one in your drawing software.

**Can I get it as DXF or DWG?**

No. Download the buildings dataset as GeoJSON or GeoPackage and convert it in a GIS-aware CAD package or QGIS, setting the projection: the coordinates are longitude and latitude (WGS 84). The print's PDF carries the map as one image, so in CAD it is a picture to trace, not outlines.

**What if a building is missing?**

The drawing shows exactly what is in your file. Fix the export, with a wider search area, or relations as well as ways in an OpenStreetMap query, and attach it again.

## Related

- [Make a map for paper, a slide or a post](https://mapstack.io/docs/make/prints.md)
- [Upload a file](https://mapstack.io/docs/your-data/upload-a-file.md)
- [Edit your data and undo changes](https://mapstack.io/docs/your-data/edit-your-data.md)
- [Download and export](https://mapstack.io/docs/share/download-and-export.md)
