# See which parts of your fields are struggling, from satellite or drone imagery

Bring in a multispectral image of your fields and see crop vigour as a vegetation index (NDVI), on a map you can share with a scout.

Video: See which parts of your fields are struggling, from satellite or drone imagery (1 min 27 s): /images/docs/videos/crop-health-from-imagery.mp4

## Best for

Farmers, agronomists, crop insurers and anyone else who needs to see where a crop is underperforming before sending someone to look. You end up with a vigour map of your image, red where plants are sparse or stressed and green where they are thriving, on a satellite base map that others can open.

**The example in this guide** is a real satellite image: a 4-band cut of the free Copernicus Sentinel-2 scene of 7 August 2026 (0% cloud), covering about 10 by 9 km of irrigated and dryland fields west of Garden City, Kansas. It has the four 10 m bands, blue, green, red and near infrared, as surface reflectance in a 6 MB GeoTIFF. Every ask below was sent with that file. The same steps work for drone or aircraft imagery that has a red and a near-infrared band.

## What you need

- **A multispectral image with a red and a near-infrared band,** as a GeoTIFF or another raster format (see [Upload imagery](/docs/your-data/imagery)). A plain colour photo has no near infrared, so the vegetation index cannot be drawn from it.
- **To know which band is which,** or which satellite or camera took it. Say it in your ask.
- **A Creator or Creator Max seat.** Imagery is on paid seats.

## Before you start

- **The vegetation index is a way of showing the image, not an analysis of it.** Mapstack draws NDVI from the red and near-infrared bands as the image is shown. It does not read the pixels to tell you which fields are worst, average the index per field, or compare two dates. If you have those figures from elsewhere, bring them as a table or a file of fields and they can be mapped.

## The prompt

> This is a Sentinel-2 image of our fields west of Garden City, Kansas, from 7 August 2026. Bands are blue, green, red, near-infrared, in that order. Show me crop vigour as NDVI so I can see which bits are struggling.

## What to expect

1. **Your image is kept with its bands named**

   Mapstack keeps the file in your Library as imagery and records what you told it: in the example, a Sentinel-2 image with its four 10 m bands in the order blue, green, red, near infrared. Naming the bands is what makes the vegetation view available, because NDVI needs to know which band is red and which is near infrared. If the bands are not named, open the imagery's **Settings** and say which satellite took it or what each band holds.

   The reply can say that Mapstack cannot calculate NDVI. That is about making a new file of index values, or figures from them. The index itself is one of the ways the image is shown.

2. **You see the vegetation index**

   1. Open the imagery from its card in the conversation.
   2. Select **Display**.
   3. Select **Vegetation**.

   The image is drawn as NDVI, the normalised difference vegetation index: near infrared minus red, divided by the two added together. Healthy plants reflect far more near infrared than red, so they score high. The colours run from red for bare ground, water and buildings, through yellow, to green for healthy plants. Struggling parts of a field show as paler or yellower than the rest of it.

   ![Example: the Sentinel-2 image of 7 August 2026 with Display set to Vegetation. The dark green circles are centre-pivot fields in full growth; the paler fields are bare, harvested or dryland.](/images/docs/crop-health-from-imagery/ndvi-garden-city.jpeg)

   A **Display** choice is for your own view. To keep it and share it, ask for a map (below).

3. **You ask for a map**

   > Put it on a satellite base map and make the colours run red for stressed to green for healthy, with a legend that says what the numbers mean.

   Mapstack makes a map with the vegetation index as the default view over a satellite base map, and adds the natural-colour and false-colour views of the same image, which anyone opening the map can switch between in the legend. The legend names the two ends of the scale in words, not in index values.

4. **You find the weak patches yourself**

   > Which parts look worst? Describe where the low-NDVI patches are so I can send a scout.

   Mapstack does not look at the image's pixels, so it cannot describe where the patches are or rank fields. It says so and points you to the map. Zoom in on a field and look for the parts that are paler than the rest of it.

   To read the numbers at a spot, select it on the map. A box shows the value of each band there. Work out NDVI from the red and near-infrared values: in the example, one spot read red 1,420 and near infrared 2,097, which is (2,097 − 1,420) ÷ (2,097 + 1,420) = 0.19. NDVI runs from −1 to 1: bare soil sits a little above zero, and a dense, healthy canopy approaches 1.

## Make it your own

> Make the vegetation view 30% transparent so the satellite base map shows through, and call the map "Garden City fields: crop vigour, 7 August 2026".

## Common questions

**Can I use an ordinary colour photo from a drone?**

Not for the vegetation index. NDVI needs a near-infrared band, and a plain colour photo has none. Drone or aircraft imagery with a red and a near-infrared band works the same way as the satellite image here.

**Where is the Vegetation option?**

Under **Display**, once Mapstack knows which band is red and which is near infrared. Open the imagery's **Settings** and name the satellite or camera, or set the bands one by one, or tell it in the conversation.

**Mapstack said it cannot calculate NDVI. Can I still see it?**

Yes. NDVI is one of the ways the image is shown: choose **Vegetation** under **Display**, or ask for a map. What Mapstack does not do is make a new file of index values.

**Can I get the average NDVI per field, or compare two dates?**

No. Mapstack shows imagery but does not analyse it, so it does not average the index per field, rank fields or compare dates. Work the figures out per field in a desktop GIS, then attach the fields with their figures and Mapstack can map and rank them.

**Why does the whole image look the same colour?**

The bands may be in a different order from the one Mapstack was told. Check the order in the file's description and correct it in **Settings**.

## Related

- [Put aerial, satellite or elevation imagery on a map](https://mapstack.io/docs/your-data/imagery.md)
- [Make a map](https://mapstack.io/docs/make/maps.md)
- [Show an elevation model as shaded relief under your boundaries](https://mapstack.io/docs/guides/elevation-on-a-map.md)
