# Find the areas with no gigabit broadband, for a funding bid

Map a regulator's coverage figures by area, list the areas under your threshold with the premises still waiting, and write it up for a funding bid.

Video: Find the areas with no gigabit broadband, for a funding bid (1 min 16 s): /images/docs/videos/broadband-coverage-gaps.mp4

## Best for

Local authorities, development agencies, community groups and network planners who need to show where a service has not reached: for a funding bid, a planning case or a build plan. You end up with a map of coverage by area, the list of areas under your threshold with roughly how many premises are waiting, the same after planned build, and a one-page summary for the bid.

**The example in this guide** is published coverage data: ComReg's (Ireland's communications regulator) Gigabit Statistics public view for the 151 electoral divisions of County Mayo, downloaded as GeoJSON on 11 November 2026. Each division has its premises count (written "<200" where ComReg suppresses small counts), the share of premises passed by gigabit broadband, the share including the planned National Broadband Ireland (NBI) build, and the share with an active connection. Every ask below was sent with that file.

## What you need

- **Coverage figures by area,** as a GIS file, or as a spreadsheet you can join to boundaries (see [Join your table to areas](/docs/guides/join-your-table-to-areas)).
- **Your threshold,** such as a share of premises passed or a speed tier.
- **The date of the data.** If the file does not carry it, have it ready to tell Mapstack.
- **A Creator or Creator Max seat** for the report. The map and the lists work on any seat.

## Before you start

- **Coverage data describes areas, not premises.** A share of premises passed tells you how much of a division is served, not which homes. Waiting premises worked out from it are estimates.
- **Suppressed counts stay suppressed.** Where the publisher hides small numbers, Mapstack shows them as given and does not guess.

## The prompt

> This is ComReg's gigabit coverage by electoral division for County Mayo. For our funding bid, which areas have no gigabit option yet? Map the share of premises passed, and list the divisions under 80% with roughly how many premises are still waiting.

## What to expect

1. **You get the map and the list**

   Your file becomes a dataset, and Mapstack makes a map of the share of premises passed, red for low and green for high, with a search by division, filters by local electoral area and the figures for any division you select. It answers the question in words and gives the table: in the example, 3 divisions with no gigabit option at all and 55 under 80%, each with its premises and an estimate of how many are waiting (premises times the share not yet passed). Divisions with a suppressed count show "<200" waiting.

   ![Example: the share of premises passed by gigabit broadband in each of Mayo's 151 electoral divisions, red for low and green for high.](/images/docs/broadband-coverage-gaps/gigabit-share-by-division.jpeg)

2. **You allow for what is already planned**

   A funding bid usually has to show the gap that remains after build already committed. If your data has a planned-build figure, ask for it to be used:

   > Now take the planned National Broadband Ireland build into account. Which divisions are still under 80% even after it?

   Mapstack read the planned-build share as the total expected coverage, not an addition to today's, and gave the divisions still under 80%: in the example, 8 of the 55, with Ballycastle the largest remaining gap (57%, about 187 premises, unchanged by the planned build).

3. **You name the places**

   > Which towns and villages sit in those divisions? Put their names on the map.

   Mapstack fetched official settlement boundaries (Tailte Éireann's census settlements, in the example), matched them to the divisions and added them to the map with name labels. It named five places and said where a division holds no census settlement, only scattered townlands. Where it fills a gap from general knowledge, it says it has not checked it against your data; treat that as a lead, not a fact.

4. **You write it up, with the right date**

   > Write a one-page summary for the bid with the map, the counts, the data date and the threshold we used.

   The summary gives the headline, the counts before and after planned build, a map marking the remaining priority divisions, the table, and notes on method and limits: that premises passed measure availability, not connections, and that suppressed counts were not filled in. It also says what it could not establish. In the example the file carried no date, so the report said the reference period was unverified. Give it the date from the source:

   > The file is ComReg's Ireland Gigabit Statistics public view, last updated 29 September 2026, downloaded 11 November 2026. Put that as the data date on the summary, not today's date.

   Open the report from the session or your Library; **Download** gives it as PDF or Word.

## Common questions

**How do I get the right data date on the report?**

Tell Mapstack the date from the source, for example "Put 29 September 2026 as the data date on the summary, not today's date." If the file carries no date, the report says the reference period is unverified until you do.

**Can I use a different threshold?**

Yes. Say it in the ask, for example "List the divisions under 90%", and the list and counts follow it.

**How exact is the number of premises waiting?**

It is an estimate: the premises in a division times the share not yet passed. Where the publisher suppressed a small count, it stays as given ("<200") and is not guessed.

**Does "passed" mean those premises are connected?**

No. Premises passed measure where gigabit broadband is available, not who has taken it up. In the example the share with an active connection is a separate column in the file.

**Can a town sit in more than one division?**

Yes. Settlement boundaries can cross division lines. Ask "Which divisions does each place touch?" and check before you target a place.

## Related

- [Upload a file](https://mapstack.io/docs/your-data/upload-a-file.md)
- [Join your table to area boundaries and map it](https://mapstack.io/docs/guides/join-your-table-to-areas.md)
- [Data Mapstack can find for you](https://mapstack.io/docs/find-data/data-mapstack-finds.md)
- [Make a map](https://mapstack.io/docs/make/maps.md)
- [Write up a report](https://mapstack.io/docs/make/reports.md)
